Power Off; Power Up From Standby Mode - GE DPI620G-IS User Manual

User Manual
1.7.2

Power Off

Press and Release the Power Button:
The POWERDOWN OPTIONS window will be displayed.
SWITCH OFF: Full power down of DPI620G-IS –
recommended if the instrument is not going to be used for
several hours (the instrument requires a full re-boot on
next power up).
STANDBY: DPI620G-IS is placed in standby mode –
reduced power consumption from operating mode –
recommended if the instrument is to be inactive for short
periods (the instrument has fast turn on from STANDBY
mode).
Note: SWITCH OFF can also be achieved by pressing and
holding the power button until the screen is blank.
1.7.3

Power up from Standby Mode

When powering up from standby mode the instrument
always opens the last screen shown before it entered
standby mode.
29 July 2016
Figure 1-5 Power down Options
116M5464 Revision -
Druck DPI620G-IS
Page 24 of 248