2.1 Introduction
2.2 Initial checks
2.3 Initial procedures
2.4 Power options
[EN] English - K0449
Chapter 2: Prepare the instrument
This chapter gives a description of these items:
•
the initial checks and procedures
•
the available power options
•
the battery and related procedures (install and charge)
•
the start up procedures
•
the menu structure and options
•
the Process and Automation options available for the
measure and source (
Before you use the instrument for the first time:
•
Make sure that there is no damage to the instrument, and
that there are no missing items; see
•
Remove the plastic film that protects the display. Use the tag
(◗ ) in the top right-hand corner.
Before you use the instrument for the first time, complete these
procedures:
•
Install the battery
(Section
•
To make sure that the calibration schedule works correctly,
set the date and time; see
•
Charge the battery
There are three power options:
Lithium-Polymer battery
functions are available with a charged battery.
5 V DC power supply
functions are available with or without the battery. It supplies
power to the instrument and charges the battery at the same
time. It charges the battery when the instrument is on or off.
USB mini Type B connection
battery when the instrument is off and increases the battery life
when the instrument is on.
)functions
Figure
2.5.2). Then re-attach the cover.
Section 2.10 (Menu
(Section
2.5.3)
(Section
2.5): All the instrument
(Section
2.6): All the instrument
(Section
2.7): This charges the
Prepare the instrument 2-1
1-7.
sequence).