Device Library; Options - GE DPI620G-IS User Manual

User Manual
by selecting:
SETTINGS
9.8.1

Device Library

The library tab shows the Device Descriptions (DDs) that
are currently on the DPI620G-IS. This allows the user to
browse for a specific device to determine that there is
support for it.
To request support for a non-registered DD please contact
your local GE Service centre (refer to Section 1.11).
9.8.2

Options

• Poll header every - Sets the refresh rate for the device
parameters displayed in the header.
• Poll all dynamic every - Sets the refresh rate for dynamic
variables in the folder variables view (note this setting only
becomes valid if the folder variables option Refresh Vars
On is active) (refer to Section 8.7.2).
• Enable Device Library Monitor - If checked enables the
automatic check of the Open Field Communications DD
library on application start up for new Device Descriptions.
Note this configuration option requires a network path to
the Internet. After installation the default setting is
'checked'.
• Confirm Device Commits - If checked brings up a
confirmation dialog before every write is committed to the
field device. After installation the default setting is
'checked'.
• Enable My Device Functions – Enables the My Device and
29 July 2016 116M5464 Revision -
Druck DPI620G-IS
Page 210 of 248