User Manual
3. Select the SCAN button.
The 'scanning' progress dialog view will open. Any
devices found will appear in the bus tree window list.
All scanned devices are shown as a bold icon with an
associated descriptor and device type (separated by
a /). If the descriptor has not been set, only the device
type will be shown.
Note: The scan may be stopped at any time by selecting
the CANCEL button. If cancelled, the current scan results
are retained.
A search term can be entered into the SEARCH dialog to
look for a specific device in the discovered scan list.
29 July 2016
Figure 9-10 Device Scan View
116M5464 Revision -
Druck DPI620G-IS
Page 188 of 248