2.1 Introduction
2.2 Initial checks
2.3 Initial procedures
2.4 Power supply
[EN] English - K0460
Chapter 2: Prepare the instrument
This chapter gives a description of these items:
•
the initial checks and procedures
•
the available power options
•
the battery and related procedures (install and charge)
•
the start-up procedures
•
the menu structure and options
•
the Process and Automation options available for the
measure and source (
Before using the instrument for the first time:
•
Make sure that there is no damage to the instrument, and
that there are no parts missing; see
•
Remove the plastic film that protects the display. Use the
tag (◗ ) in the top right-hand corner.
Before using the instrument for the first time, complete these
procedures:
•
Charge the battery
•
Install the fully-charged battery
the cover.
•
To make sure that the calibration schedule works correctly,
set the date and time; see
This instrument is battery powered:
Ni-MH battery
(Section
available with a fully-charged battery.
)functions
Figure
(Section
2.5.3).
(Section
2.5.2). Then refit
Section 2.8 (Menu
2.5): All the instrument functions are
Prepare the instrument 2-1
1-7.
sequence).