Start-Up - GE DPI620G-IS User Manual

User Manual
9.3

Start-up

PROFIBUS is started by selecting:
DASHBOARD >>
Tasks can be selected for CH1, P1 and P2 (refer to Section
2.2).
CH2 is locked into Volts measure mode. Trying to select a
function on CH2 will result in an information message and
the selected function not being set.
29 July 2016
Figure 9-1 CH2 Function Not Set
116M5464 Revision -
PROFIBUS
Druck DPI620G-IS
Page 178 of 248