Power Supply; Ac Input; Dc Input (Option Adts 405F Mk2 Only); Adts 405R Mk2 Rack-Mounted Version - GE Druck ADTS 405 R Mk2 Instruction Manual

Item Part Number
10a AA500F-19
10b AA500F-20
10c AS405-53-1729M0
10d AS405-54-1729M0
11 AS405-60-1891M0
12 AS405-82-1891M0
13a AA500F-22
13b AA500F-23
14 AS405-31-1891M0

2.3 Power Supply

See Safety and Installation Guide 124M8686 for full details.

2.3.1 AC Input

RISK OF ELECTRIC SHOCK
panel is not classified as a disconnecting device. To isolate the power
supply disconnect the power supply connector.
100/120/230 V

2.3.2 DC Input (Option ADTS 405F Mk2 Only)

INFORMATION
DC operation or specified EMC performance may be impaired.

2.3.3 ADTS 405R Mk2 Rack-mounted Version

1. The unit must be connected to the correct electrical power supply as stated, beside
the power connectors on the rear panel.
2. Install an easily accessible isolator in the power supply circuit.
© 2017 General Electric Company – All Rights Reserved.
Table 2-2: Spares and Accessories List
Description
Red Hose (State Length in Metres)
Blue Hose (State Length in Metres)
Yellow Hose, 15 m
Green Hose, 15 m
Altimeter Encoder Cable
O-ring Kit
Hose Connector AN4
Hose Connector AN6
DC Power Cable
Table 2-3: AC Power Supply Requirements
Voltage
115 V
A protective earth connection must also be made for
Table 2-4: DC Power Supply Requirements
Voltage
16 to 30 V
The power supply switch on the front
Frequency
50/60 Hz
400 Hz
Power
500 VA
ADTS 405 R/F Mk2 Instruction Manual-English | 9
Power Supply
Used On
ADTS 405F/R
ADTS 405R
ADTS 405F/R
ADTS 405F/R
ADTS 405F/R
ADTS 405F
Power
500 VA