Start-Up - GE DPI620G-IS User Manual

User Manual
The Druck DPI DPI620G-IS can be used to communicate
with other HART® field devices as follows:
• As a Primary Master the Druck DPI620G-IS starts and
controls all communications. The field device (slave)
uses each command from the master device to make
a change and/or send data back.
• As a Secondary Master the Druck DPI620G-IS is
connected into an existing HART® communications
network. The Secondary Master communicates with
the field device in between Primary Master messages.
6.2

Start-up

HART® communication is started by selecting:
DASHBOARD >>
Task can be selected for CH1, CH2, P1 and P2. Refer to
Section 2.2.
HART® can also be selected from the CALIBRATOR
function.
Select:
29 July 2016
COMMUNICATOR channel from TASK SETTINGS
FUNCTION >> HART
116M5464 Revision -
HART
Druck DPI620G-IS
Page 106 of 248