GE DPI620G-IS User Manual page 101

User Manual
• ERROR TYPE – The deviation from which the
% Span
% Rdg
• LINEARITY -
Linear
Square Root
• TOLERANCE – The test limits for the deviation from the
29 July 2016
transfer characteristic is to be
calculated. This can be one of the
following:
a percentage of the Input signal span.
a percentage of the Input signal reading.
The transfer characteristic from
Reference to Input signal. This can be
one of the following:
a proportional response.
often found in flow sensors.
transfer characteristic.
116M5464 Revision -
Druck DPI620G-IS
Page 101 of 248