Set The Pressure Module To Zero - GE DPI620G-IS User Manual

User Manual
3.5

Set the Pressure Module to Zero

Use this option to write a new zero pressure value to the
pressure module in use. The sensor adjustment is
permitted if it obeys the condition that follows:
• Adjustment ≤10% FS positive pressure value (for the
Sensor).
Note: To make a temporary adjustment for zero, use the
Tare function.
29 July 2016
SETTINGS >> ZERO >> ZERO
116M5464 Revision -
Druck DPI620G-IS
Page 85 of 248