Communication Errors - Scanivalve DSA3217-PTP Series Operation And Service Manual

Pressure scanner digital sensor array

Table of Contents

Appendix

The pressure value entered was not numeric

ERROR: Insert's type not valid

ERROR: Insert's type must be M

The insert type must be M

ERROR: LIST M start temp not valid

The start temp entered was less than 0, greater than 69, or not numeric

ERROR: List M start temp above <max temp>

The start temp entered was greater than 69

ERROR: LIST M stop temp not valid

The stop temp entered was less than start temp, not numeric, or greater than 69

ERROR: List M stop temp above <max temp>

The stop temp entered was greater than 69

ERROR: LIST A start temp not valid

The start temp entered was less than 0, greater than 69, or not numeric

ERROR: List A start temp above <max temp>

The start temp entered was greater than 69

ERROR: LIST A stop temp not valid

The stop temp entered was less than start temp, not numeric, or greater than 69

ERROR: List A stop temp above <max temp>

The stop temp entered was greater than 69

ERROR: DELETE start temp value not found

The start temp was not entered or was not numeric

ERROR: DELETE start temp not valid

The start temp entered was less than 0, greater than 69, or not numeric

ERROR: DELETE stop temp value not found

The stop temp was not entered or was not numeric

ERROR: DELETE stop temp not valid

The stop temp entered was less than 0, greater than 69, or not numeric

ERROR: Delete start temp above <max temp>

The start temp entered was greater than 69

ERROR: Delete stop temp above <max temp>

The stop temp entered was greater than 69

ERROR: Max errors exceeded

The error buffer is full - more than 15 errors have been detected

ERROR: No Errors

No errors have been detected - this is the normal response to the error command