List Identification; List Ip Settings (List Ip) - Scanivalve DSA3217-PTP Series Operation And Service Manual

DSA3200-PTP

List Identification

Command
Command Syntax
Arguments
Description
Returns
Example

LIST IP Settings (LIST IP)

Command
Command Syntax
Arguments
Description
Returns
LIST IDENTIFICATION
LIST I
None
Lists the IDENTIFICATION configuration variables.
SET ECHO <term>
SET MODEL <term>
SET PORT <term>
SET HOST <term>
To verify the general module configuration settings of, type: LIST i<CR>
The DSA3217-PTP may return:
SET ECHO 0
SET MODEL 3217
SET PORT 23
SET HOST 0.0.0.0 0 T
NOTE: A user must be very careful when modifying one of these variables. An incorrect value
in one of these variables could have a detrimental affect on the operation of the module.
LIST IP Variables
Returns all of the IP settings
LIST IP
All of the IP setting followed by the prompt.
LIST IP
SET IPADD 191.30.82.100
SET SUBNET 255.255.0.0
SET MAC 000.096.093.082.000.100
SET LOGIN Scanivalve
SET PASSWORD Scanner
SET LOGIN1 Scanivalve1
SET PASSWORD1 Scanner1
SET ALLOWANON 1
SET APP Dsaptp.hex
SET GW 0.0.0.0
NOTE1: Modifications to the variables in this group may result in one or more of the following
conditions:
1. Unstable network operation.
2. Problems completing FTP file transfers.
3. DSA operational problems
NOTE2: The variables in this group are not saved when a SAVE command is issued. They may
only be saved by using the command:
SAVEIP via Serial connection
SAVE IP via Ethernet connection
29
29
Section 5: Software