Get Ptp Time; Get Utc Offset - Scanivalve DSA3217-PTP Series Operation And Service Manual

Section 5: Software
Command
Notes

Get PTP Time

Command
Command Syntax
Arguments
Description
Returns

Get UTC Offset

Command
Command Syntax
Arguments
Description
Returns
SETTIME
SETTIME must not be used if SET PTPEN 1 and a PTP grandmaster is present.
GETTIME
GETTIME
None
Commands the DSA-PTP to get the PTP time. If no grandmaster is present or time pro-
gramed, the DSA-PTP will return the default time. Time is adjusted by UTCOFFSET
Current Time YYYY/MM/DD hh:mm:ss.ffff sec XXXX ns YYYYYYYYY
GETUTCO
GETUTCO
None
Commands the DSA-PTP to get the UTC offset from the grandmaster
- The current difference between TAI time and UTC time, in seconds, as supplied by the local
grandmaster.
- UTC updated flag
- Set when UTC offset is valid.
Current UTC Offset 0 0 0
38
38
DSA3200-PTP