Computer Checkup (Test); View System Information (Inspect) - Compaq Professional Workstation AP200 Reference Manual

2-10 Software

Computer Checkup (TEST)

NOTE: Computer Checkup will detect Compaq hardware. Devices from other
manufacturers may not be detected.
Use Computer Checkup (TEST):
To determine if all the devices installed on the workstation are
recognized by the system and functioning properly. Running TEST is
optional but recommended after installing or connecting a new device.
To save, print, or display the information generated by TEST. You
should run TEST and have the printed report available before placing a
call to the Compaq Customer Support Center.
To assist your Compaq Authorized Dealer, Reseller, or Service Provider
in analyzing the system by allowing the Service Provider to reproduce
the same environment on another workstation for testing.
For information on using TEST, see the section "Using Computer Checkup
(TEST) or View System Information (INSPECT)" in this chapter.

View System Information (INSPECT)

NOTE: View System Information will detect Compaq hardware. Devices from
other manufacturers may not be detected.
Use View System Information (INSPECT):
To view information about the system once it has been configured.
To save, print, or display the information generated by INSPECT. You
should run INSPECT and have the printed report available before
placing a call to the Compaq Customer Support Center.
To assist your Compaq Authorized Dealer, Reseller, or Service Provider
in analyzing the system by allowing the Service Provider to reproduce
the same environment on another workstation for testing.
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: C-CH02.DOC Last Saved On: 12/15/98 4:21 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED