Computer Checkup (Test); Error Messages - Compaq Deskpro AP400 Reference Manual

2-4 Compaq Setup and Diagnostic Software

Computer Checkup (TEST)

Use Computer Checkup (TEST) in the following instances:
To determine if all devices are recognized by the system and functioning
properly. Running TEST is optional, but recommended, after you install
or connect a new device.
To save, print, or display the information generated by TEST. It is
recommended that you run TEST and have the printed report available
before placing a call to the Compaq Customer Support Center.
To assist your Compaq authorized dealer, reseller, or service provider in
analyzing the system by allowing the service provider to reproduce the
same environment on another workstation for testing.
To run Computer Checkup (TEST):
1. Turn on only the external devices that you wish to test. You may wish to
leave the printer connected to log error messages.
2. Access the Compaq Utilities menu.
3. From the Compaq Utilities menu, select Computer Checkup (TEST).
4. When the test option menu appears, select the option to view the device
list.
5. Verify that TEST correctly detected the devices installed.
NOTE: This utility will detect all devices manufactured by Compaq; devices
from other manufacturers may not be detected.
Writer: John Turner Project: Compaq Professional Workstation AP400 Reference Guide Comments: 317787-003
If the list is correct, select OK and go on to step 6.
If the list is incorrect, be sure that any new devices are installed
properly. If you do not find an installation problem, call your
Compaq authorized dealer, reseller, or service provider.
File Name: C-CH02.DOC Last Saved On: 12/10/98 11:03 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED