Solving Disk Problems - Compaq Professional Workstation AP200 Reference Manual

6-4 Troubleshooting
Solving Minor Problems
Problem
Workstation powered-
off automatically.
Workstation appears to
pause periodically.

Solving Disk Problems

Common causes and solutions for disk problems are listed in the
following table.
NOTE: You may need to reconfigure the workstation when you add or
remove hardware, such as an additional diskette drive. See "Solving
Hardware Installation Problems" for instructions.
Writer: IM Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
Continued
Cause
The unit temperature
was exceeded. The fan
may be blocked.
The unit temperature was
exceeded because the
workstation was
functioning with the cover
or side panel removed.
Network driver is loaded
and no network
connection is
established.
File Name: G-CH06.DOC Last Saved On: 12/15/98 4:26 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Solution
Unit is in an exceedingly hot
environment. Let it cool down.
Contact your Compaq Authorized
Reseller or Service Provider.
Replace cover or side panel and
let the workstation cool down
before attempting to turn on
power to the workstation.
Establish a network connection or
use Computer Setup to disable
the network controller.