Appendix E Error Codes; Power On Self Test Messages - Compaq Professional Workstation AP200 Reference Manual

Appendix E
Error Codes
This chapter lists the error codes you might encounter during the Power-On
Self-Test (POST) or after restarting the computer, the probable source of the
problem, and the steps you can take to resolve the error condition.
Message
101-Option ROM
Checksum Error
102-System Board
Failure
* L = Long, S = Short
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
Table E-1
Power-On Self-Test Messages
Beeps* Probable Cause
1L, 1S Option ROM checksum
None DMA, timers, etc.
File Name: L-APPE.DOC Last Saved On: 12/14/98 2:40 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Recommended Action
1. Inspect the ROM
placement.
2. Verify the correct
ROM.
3. Replace the ROM.
Replace the system
board.
Compaq Professional Workstation AP200 Reference Guide
E-1
Continued