Compaq Professional Workstation AP200 Reference Manual page 149

Power-On Self Test Message
Message
Audible
Flashing Power and HD
LEDs
Flashing Num Lock
* L = Long, S = Short
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: L-APPE.DOC Last Saved On: 12/14/98 2:40 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Continued
Beeps* Probable Cause
1L, 3S System ROM is bad; system is
running in Failsafe Boot Block
mode.
None Unseated backplane
1S, 2L System memory not present
Compaq Professional Workstation AP200 Reference Guide
E-9
Recommended Action
Reflash the ROM using a
ROMPaq diskette. See
the "Failsafe Boot Block
ROM" section of Chapter
3, "Intelligent Manage-
ability."
1. Remove backplane.
2. Wipe connector.
3. Reinstall backplane
(see Chapter 4,
"Hardware
Upgrades," for
directions on
removing the riser
brace).
1. Check DIMM (see
Chapter 4,
"Hardware
Upgrades," for
directions for
installing DIMMs).
2. Remove and reseat
DIMM.
3. See the "Solving
Memory Problems"
section of Chapter
6, "Trouble-
shooting."
Continued