Compaq Professional Workstation AP200 Reference Manual page 147

Power-On Self Test Message
Message
1151-System Board
Com Port 1 Address
Assignment Conflict
1152-System Board
Com Port 2 Address
Assignment Conflict
1720-SMART Hard
Drive detects imminent
failure
1771-Primary Disk
Port Address
Assignment Conflict
1772-Secondary Disk
Port Address
Assignment Conflict
1780-Disk 0 Failure
1781-Disk 1 Failure
* L = Long, S = Short
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: L-APPE.DOC Last Saved On: 12/14/98 2:40 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Continued
Beeps* Probable Cause
2S Both external and internal serial
ports are assigned to COM1.
2S Both external and internal serial
ports are assigned to COM2.
None Hard drive is about to fail.
2S Internal and external hard drive
controllers are both assigned to
the primary address.
2S Internal and external hard drive
controllers are both assigned to
the secondary address.
None Hard drive/format error
None Hard drive/format error
Compaq Professional Workstation AP200 Reference Guide
E-7
Recommended Action
Run Computer Setup or
Windows NT utilities.
Run Computer Setup or
Windows NT utilities.
Back up contents and
replace hard drive.
Run Computer Setup or
Windows NT utilities.
Run Computer Setup or
Windows NT utilities.
Run Compaq Diagnostics
for Windows NT. See
Chapter 2, "Software."
Run Compaq Diagnostics
for Windows NT. See
Chapter 2, "Software."
Continued