Compaq Professional Workstation AP200 Reference Manual page 143

Power-On Self Test Message
Message
163-Time and Date Not
Set
164-Memory Size
Error
* L = Long, S = Short
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: L-APPE.DOC Last Saved On: 12/14/98 2:40 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Continued
Beeps* Probable Cause
2S Invalid time or date in
configuration memory
RTC (real-time clock) battery
may need to be replaced.
Battery life is approximately 5
years.
CMOS jumper may not be
properly installed.
2S Memory configuration incorrect
Compaq Professional Workstation AP200 Reference Guide
E-3
Recommended Action
Set the date and time
under Control Panel.
If the problem persists,
replace the RTC battery.
See Chapter 4,
"Hardware Upgrades,"
for instructions on
installing a new battery,
or contact your Compaq
Authorized Dealer or
Reseller for RTC battery
replacement.
Follow Appendix G
instructions on clearing
configuration memory for
proper placement of the
CMOS jumper.
Make sure your memory
module(s) (if any) are
installed properly.
Continued