NXP Semiconductors
5 Installing and configuring software tools
5.1 Flashing S32K144 MCU GUI firmware
The KITFS23LDOEVM is delivered with the S32K144 firmware already flashed.
5.2 Installing the FS23 NXP GUI software package
To install the FS2300 NXP GUI, first download or obtain the NXP GUI package, then follow the instructions
below:
1. Open the NXP GUI package. Unzip and open the 1 - NXP_GUI_Setup folder
Figure 12. GUI folder list
2. Double click NXP_GUI-version-Setup.exe to launch the application and follow the instructions.
Figure 13. NXP_GUI-version-Setup.exe
3. Click Next when the initial application setup window appears.
Figure 14. GUI setup window
UM11879
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 25 September 2023
UM11879
KITFS23LDOEVM evaluation board
© 2023 NXP B.V. All rights reserved.
20 / 73