Table of Contents
Advertisement
FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (FDC Scenario)
Figure 11-18 Generating a startup password
Step 5 On the Offline Activation screen of the display module, specify BarCode and
Codes that are available on home screen of the controller, and tap Generate PWD
to generate a startup password.
Step 6 Tap Password on the screen of the unit and enter the generated startup password
in the displayed dialog box.
Step 7 After startup, the system automatically enters the wizard-based startup mode.
----End
11.7 Wizard Startup
Context
Wizard Startup allows you to commission the indoor fan, spray system, exhaust
fan, and cooling system, and supports automatic running and judgment of
components.
After you power on the smart cooling product for the first time, the Wizard
Startup screen is displayed. If the smart cooling product is started not for the first
time, choose Menu > Maint > Wizard Startup to enter the Wizard Startup
screen.
Tapping No or Exit, a submission timeout, and a system exception during
commissioning all result in commissioning failures. To start the commissioning
again, choose Maint > Wizard Startup to enter the Wizard Startup screen.
Issue 01 (2022-06-30)
NO TE
Tap
and scan the QR code on the Set Startup screen of the display module. The
barcode and verification code are automatically entered on the app.
NO TE
To ensure security, the original password becomes invalid and the initial startup
authentication fails if the startup verification fails.
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
11 Power-On Commissioning
82
Advertisement
Table of Contents
