Installing A Unit; Unpacking And Checking - Huawei FusionCol8000-E260 Quick Manual

Modular indirect evaporative cooling system
Hide thumbs Also See for FusionCol8000-E260:
Table of Contents

Advertisement

FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (FDC Scenario)

3.1 Unpacking and Checking

Context
Move the unit closest to the installation position before unpacking it to facilitate
movement and avoid damage.
Procedure
Step 1 Check that the external package of the unit is intact. If any damage is found,
notify the carrier immediately.
Step 2 Check whether the exterior of the unit is in good condition and free of collision
marks or scratches. If any damage is found, notify the carrier immediately.
Step 3 Remove the rainproof cloth from the indoor air return vent and indoor air supply
vent.
Step 4 Remove the stretch wrap from the water pipe opening.
Step 5 Check the type and quantity of fittings against the packing list. If some fittings are
missing or do not comply with the models in the packing list, record the
information and contact the supplier immediately.
----End
Issue 01 (2022-06-30)
NO TE
During movement, do not tilt it for 90
NO TE
● Do not remove the plastic packing materials before connecting pipes and cables to
prevent dust and other foreign matter from entering the unit.
● After pipes and cables are connected, take dustproof measures in a timely manner
based on site requirements.
Copyright © Huawei Digital Power Technologies Co., Ltd.
3

Installing a Unit

o
.
3 Installing a Unit
6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FusionCol8000-E260 and is the answer not in the manual?

Questions and answers

Table of Contents