Table of Contents
Advertisement
FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (FDC Scenario)
Figure 3-11 Taking out the desiccant bags 2
Step 2 Loosen the three transport fixing bolts on each compressor using a socket electric
screwdriver, and remove the sheet metal fasteners.
Figure 3-12 Removing sheet metal fasteners from a compressor
Step 3 Tighten the bolts on the compressors again to a torque of 4.0 N·m.
----End
Issue 01 (2022-06-30)
NO TE
● Do not remove the bolts.
● Keep the removed sheet metal fasteners properly for future transportation.
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Installing a Unit
15
Advertisement
Table of Contents
