Huawei FusionCol8000-E260 Quick Manual page 89

FusionCol8000-E260 Modular Indirect Evaporative
Cooling System
Quick Guide (FDC Scenario)
Procedure
Step 1 On the home screen, choose Menu > Maint > Wizard Startup.
Step 2 Read the precautions on the screen and confirm whether to access the wizard-
based startup mode.
●
●
Figure 11-19 Precautions for wizard-based startup
Step 3 Tap Yes to read the check items on the screen and confirm whether each item is
verified. After finishing the check:
●
●
Step 4 Follow the onscreen instructions to complete the wizard-based startup.
1.
Issue 01 (2022-06-30)
Tap Yes to enter the screen for checking before wizard-based startup.
Tap No to exit the wizard-based startup mode.
NO TE
● For the initial wizard-based startup, Last Record is in gray, indicating that operation is
not allowed.
● For a non-initial wizard-based startup, you can choose Last Record to view the last
wizard-based startup report.
Tap Yes to execute the wizard-based startup task.
Tap No to exit the wizard-based startup mode.
Figure 11-20 Checking before startup
Select the items that are involved in wizard-based startup (all items are
selected by default when you access the commissioning item selection screen
for the first time) and confirm whether to start the task.
– Tap Yes to start the system and commission components.
– Tap No to exit the commissioning while keeping the system shut down.
Copyright © Huawei Digital Power Technologies Co., Ltd.
11 Power-On Commissioning
83