Finishing Initial Configuration; Figure 3-9 Initial Configuration Wizard Url Access Screen Example - Silicon Graphics NAS MIS Setup Manual

3: MIS NAS Operation and GUI Startup

Finishing Initial Configuration

44
Figure 3-9 Initial Configuration Wizard URL Access Screen Example
You will notice a brief instruction set displayed on the console above the login prompt. It is
essential to follow these instructions and use the internet browser to perform a few basic
configuration steps.
The appliance is now almost ready for use. As per the instructions shown in Figure 3-9, use the
displayed URL (in this example case it is http://192.168.0.251:2000) to connect your browser to
the SGI MIS NAS GUI-based Initial Configuration Wizard. The Wizard will guide you through
the most essential appliance setup steps – for more information refer to the SGI NAS User Guide
(P/N 007-5860-00x).
007-5921-001