Install The Ac Output Power Cable - Huawei iSitePower-M ISP-M-MAB05B1 Manual

iSitePower-M V100R002C00
User Manual (MAP05A1, MAB05B1)
Figure 8-5 Installing the PV input power cables
----End

8.1.4 Install the AC Output Power Cable

● Do not reversely connect or short-circuit the live wire and neutral wire of an AC
● The PE wire of an AC power cable must be grounded.
● Do not reversely connect AC output power cables.
A leakage protection device must be configured for the AC output of the system.
The leakage current must be 30 mA. You need to configure and install the device
by yourself.
Procedure
Step 1 Connect AC power cables to the terminal connectors.
Issue 03 (2022-10-28)
CA UTION
power cable.
NO TICE
NO TE
In a single-node system, connect the other end of the AC output power cable to a PDB. In a
parallel system, connect the other end of the AC output power cable to the AC parallel box.
Copyright © Huawei Digital Power Technologies Co., Ltd.
8 Electrical Connection
73