Table of Contents
Advertisement
iSitePower-M V100R002C00
User Manual (MAP05A1, MAB05B1)
Basic Requirements
● Do not expose batteries at high temperatures or around heat-generating
● To avoid leakage, overheating, or fire, do not disassemble, alter, or damage
● The fire hazard of the lithium-ion/sodium-ion battery energy storage system is
●
●
●
●
●
●
●
●
●
●
Personal Safety
●
●
Issue 03 (2022-10-28)
D ANGER
sources, such as sunlight, fire sources, transformers, and heaters. The battery
may cause a fire if overheated.
batteries. For example, do not insert foreign objects into batteries or place
batteries in water or other liquids.
high. Consider the following safety risks before handling batteries:
●
Battery electrolyte is combustible, toxic, and volatile.
●
Battery thermal runaway can generate flammable gas and harmful gas
such as CO and HF.
●
The concentration of flammable gas generated from battery thermal
runaway may cause deflagration and explosion.
The batteries must be stored separately inside the packaging. Do not store
batteries together with other materials or in the open air. Do not stack
batteries too high.
Do not use batteries beyond the warranty period.
Do not remove the battery packaging before use. Batteries should be charged
during storage by professionals as required. Put batteries back to their
packaging after charge during storage.
Move batteries in the correct direction. Do not place a battery upside down or
tilt it.
Protect batteries from impact.
Do not perform welding or grinding work around batteries to prevent fire
caused by electric sparks or arcs.
Use batteries within the temperature range specified in this manual.
Do not use damaged batteries (such as damage caused when a battery is
dropped, bumped, or dented on the enclosure). Damaged batteries may
release flammable gases. Do not store damaged batteries near undamaged
products.
Do not place damaged batteries in close proximity to flammable materials.
Do not approach the damaged batteries unless you are a professional.
Monitor damaged batteries during storage for signs of smoke, flame,
electrolyte leakage, or heat.
Wear proper personal protective equipment (PPE) during operation. If there is
a probability of personal injury or equipment damage, immediately stop the
operations, report the case to the supervisor, and take feasible protective
measures.
Use tools correctly to avoid hurting people or damaging the equipment.
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Precautions
6
Advertisement
Table of Contents
