Huawei iSitePower-M ISP-M-MAB05B1 Manual page 32

iSitePower-M V100R002C00
User Manual (MAP05A1, MAB05B1)
Table 2-4 Recommended battery configuration
Scenario
Single-node
system
Single-node
system (capacity
expansion
scenario)
Parallel system
Issue 03 (2022-10-28)
NO TE
● Maximum capacity:
1. In a single-node system, a maximum of six battery modules can be connected.
2. In a parallel system, a maximum of three power modules can be connected. Each
power module can connect to a maximum of three battery modules.
● In a parallel system, three routes of single-phase output can be combined but they
cannot be used as three-phase output.
● In a parallel system, the number of battery modules on the master and slave products
must be the same.
● In a parallel system, if the number of battery modules on the master and slave products
are different (not recommended), the products with larger capacity may fail to fully
discharge in heavy load scenarios.
Number of
Power Modules
1
2
3
NO TE
In a parallel system, if the number of battery modules in the master product is different
from that in the slave product (not recommended), for example, two power modules and
five battery modules, the power/capacity of battery modules is 9 kW/25 kWh.
Copyright © Huawei Digital Power Technologies Co., Ltd.
2 Product Description
Number of
Battery Modules
1
2
3
4
5
6
2
4
6
3
6
9
Power/Capacity
of Battery
Modules
2.5kW/5kWh
5kW/10kWh
5kW/15kWh
5kW/20kWh
5kW/25kWh
5kW/30kWh
5kW/10kWh
9kW/20kWh
9kW/30kWh
7.5kW/15kWh
13.5kW/30kWh
13.5kW/45kWh
21