Table of Contents
Advertisement
iSitePower-M V100R002C00
User Manual (MAP05A1, MAB05B1)
Figure 8-56 Installing battery signal cables
----End
8.6 (Optional) Connecting a Remote EPO Cable
● The EPO switch can be connected to the device and can be associated with
● Press and hold the EPO switch for 3s to shut down the entire system (including
● The connection position of the EPO switch must be different from the mains
● Prepare the EPO switch and cable before installation. The recommended cable
● Equip the EPO switch with a protective cover to prevent misoperations, and
Issue 03 (2022-10-28)
NO TICE
DIN1/DIN2 through software configuration. By default, the EPO switch is
closed.
the DG).
detection position of the ATS.
size is 22 AWG.
protect the cable with a protective tube.
Copyright © Huawei Digital Power Technologies Co., Ltd.
8 Electrical Connection
122
Advertisement
Table of Contents
