iSitePower-M V100R002C00
User Manual (MAP05A1, MAB05B1)
B
B.1 Preparing a Cord End Terminal
Figure B-1 Preparing a cord end terminal
(1) Cable
B.2 Preparing an OT Terminal
● Avoid scratching the core wire when stripping a cable.
● The cavity formed after the conductor crimp strip of the OT terminal is crimped
● Wrap the wire crimping area with heat shrink tubing or insulation tape. The
● When using a heat gun, protect the equipment from being scorched.
Issue 03 (2022-10-28)
Preparing the Cable and Terminal
NO TICE
must wrap the core wires completely. The core wires must contact the OT
terminal closely.
heat shrink tubing is used as an example.
Copyright © Huawei Digital Power Technologies Co., Ltd.
(2) Cord end terminal
B Preparing the Cable and Terminal
(3) Crimping tool
162