Table of Contents
Advertisement
iSitePower-M V100R002C00
User Manual (MAP05A1, MAB05B1)
11.5 Power-On
Do not touch the manual ON/OFF switch during the installation. Otherwise,
electric shocks may occur.
11.6 SOC Changes
How does the SOC change from 99% to 100% when the battery is about to be
fully charged?
When the SOC is greater than 99%, the battery switches to float charging and the
charge current decreases gradually until the SOC reaches 100%.
11.7 Checking Cable Connections when the Product
Fails to Be Upgraded
If the product fails to be upgraded, check the cable connections. Ensure that the
cables are correctly connected and perform the upgrade again.
11.8 WiFi QR Code Scanning
Scan the QR code on the device to connect to the WiFi. If the connection fails,
contact your installer.
11.9 Querying the Battery Capacity in the Parallel
System Scenario
Query the total system capacity on the app.
11.10 Problem Handling
If you have any questions, contact your dealer or Huawei technical support.
11.11 Resetting Password
●
●
●
Issue 03 (2022-10-28)
Enable/Disable WiFi: Hold down the WiFi switch for at least 10s to enable or
disable WiFi. The WiFi function is disabled by default.
WiFi password and monitoring unit password reset: Press the WiFi switch for
three consecutive times within 10s. Wait for more than 1s and press the
switch again to reset the WiFi password and monitoring unit password.
Password reset will result in system restart, which may interrupt the power
supply to loads. Therefore, you are advised not to reset the passwords when
power is supplying to loads.
Copyright © Huawei Digital Power Technologies Co., Ltd.
11 FAQs
155
Advertisement
Table of Contents
