Installing Genset Control Signal Cables - Huawei iSitePower-M ISP-M-MAB05B1 Manual

iSitePower-M V100R002C00
User Manual (MAP05A1, MAB05B1)
Figure 8-47 Installing an AC input power cable
----End

8.4.6 Installing Genset Control Signal Cables

For a genset that starts when the dry contact is open, connect the signal cable to
ports NO and COM. For a genset that starts when the dry contact is closed,
connect the signal cable to ports NC and COM.
Procedure
Step 1 Install genset control signal cables.
Issue 03 (2022-10-28)
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
8 Electrical Connection
113