Open Issues; Rsc Console Switches To The Server Console Without Warning When Openboot Prom Enhanced Diagnostics Are On Or The Keyswitch Is In The Diagnostics Position; Disk Errors Are Reported In Loghistory While Running Sunvts, But No Errors Are Reported In Sunvts Or Solaris - Sun Microsystems Sun Fire V890 Product Notes

Open Issues

This section describes bugs and anomalies associated with the Sun Fire V890 server.
In many cases, software patches that provide fixes for these bugs are available. Visit
the SunSolve Online web site, or contact your Sun authorized service provider for
information about patch availability. For more information, see "Required and
Recommended Software Patches" on page 4.
RSC Console Switches to the Server Console
Without Warning When OpenBoot PROM
Enhanced Diagnostics Are On or the Keyswitch Is
in the Diagnostics Position
When the OpenBoot PROM enhanced diagnostics are enabled, the rsc-console
connection gets sent to the server console without warning. When this occurs, the
RSC console may appear not to respond to RSC commands. This behavior can also
happen when you are using RSC while the front panel keyswitch of the Sun Fire
V890 server is set to the Diagnostics position.
Disk Errors Are Reported in loghistory While
Running SunVTS, But No Errors Are Reported in
SunVTS or Solaris
If you run SunVTS™ software and RSC software simultaneously, you may see disk
errors reported when you use the loghistory command that do not appear in
SunVTS tests. This occurs because SunVTS cannot suspend RSC monitoring while
tests are running. RSC reports each state change as a disk error. These messages do
not appear when SunVTS is not running tests.
16 Sun Fire V890 Server Product Notes • September 2004