Display Screen - Extron electronics TouchLink TLP Pro 320C User Manual

Display Screen

The image below shows the entire
can only see part of the screen at any time. Flick the touchscreen with your finger to navigate
up or down within the screen.
Figure 20.
The
•
•
•
•
Display
Resolution
Screen:
SLEEP TIMER
Off, 1 - 120
Off
BRIGHTNESS - 99
0
Auto
BUTTON LED
Backlight:
Display Screen
Display screen allows you to set the
(320x240) is read-only.
Resolution
— determines how long the panel will be inactive before it enters sleep
Sleep Timer
mode. In sleep mode, the screen goes dark to save power. Use the
switch the sleep timer
Off
Brightness — provides a suitable amount of backlighting that is automatically calculated
from the amount of ambient light detected by the light detector. Press the gray circle and
drag it along the green line to adjust the brightness setting between
— provides LED backlighting for the eight front panel buttons next to the
Button LED
touchscreen. Toggle between
screen. Because of size of the touchscreen, you
Display
Exit
320x240
1 Minute (s)
2
100
Sleep Timer , Brightness
or to set a value between and
1
and .
On Off
TLP Pro 320C • Setup Menu
, and Button LED .
up and down arrows to
minutes.
120
and .
0 100
26