KEYTEK CTS 2000 Instruction Manual page 80

Midi functions, transmit or receive mode, Midi channels and all other options can be preset
independently for each preset and, within each preset, independently for each keyboard Zone
(octave) using, in EDIT mode, the MIDI Parametric Family.
Midi mode selection
The Reception Mode can be selected independently for each Zone (octave) of the keyboard using the
OMNI ON/OFF parameter of the MIDI family.
Omni On (Poly)
Messages will be accepted and acknowledged regardless of the reception channel selected in each
individual Zone (octave) of the keypad and are received in polyphony.
Omni Off (Poly)
Since the keyboard of your instrument is divided into 5 Zones (octave), it is possible, by selecting this
mode, to assign to each Zone (octave) of the keyboard a different number of Midi transmission
channel and a different Midi reception channel.
In transmission, each octave of the CTS 2000 can transmit MIDI signals to a different slave, while in
reception you can use the five octaves of your instrument as five completely independent slave units.
Selecting the transmission or reception Midi channel
The transmit or receive Midi channel is selected independently for each Zone (octave) of the
keyboard using the TRANSMIT CH. and RECEIVE CH. parameters of the Midi family.
Selecting the number of Program Changes in transmission
It is possible to associate each Zone (octave) of the keyboard with a different Program Change
number from 0 to 127 to be sent via Midi.
The programme change number is selected via the TX PRG CHANGE parameter of the Midi family.
ATTENTION
Program Change will only be received and executed on the Midi channel assigned to Zone 0.
Transposition of Note values in transmission
It is possible to select a different Transmitted Note value for each Keyboard Zone (octave) than the
one actually played.
The amount of transposition (-48 to +48 semitones from the original note) is selected via the TX
TRANSPOSE parameter in the Midi section.
IMPORTANT
Using the two MIDI buttons on the side of the display, you can manage the MIDI functions
immediately, enabling or disabling the transmission and reception of signals and selecting the mode
of transmission and/or reception of Program Change messages.
On/Off
Enables or disables Midi transmit and receive mode.
Midi Local/Remote