KEYTEK CTS 2000 Instruction Manual page 28

If the value of Time 1 is set to 1 the transition from the Second to the Third form
wave is immediate.
With values greater than 1, the changeover is gradual and proportional to the value
entered.
_________________________________________________________
Family no. 3 : CROSS WAVE 1 Display Fam. : OSCILLATOR 2
Group : DIGITAL OSCILLATOR 2 CROSS WAVE 1
________________________________________________________
Parameter : OCTAVE
Power meter : A
Display Par. OSC2 OCTAVE ( z )
OLD xx NEW yy
Value xx/yy : from 0 to 5
Function : Selects the sound pitch, in terms of musical octave, of the waveform
(table) selectable from Oscillator 2.
Eighth Frequency value
0 from C 32.7 Hz to B 61.6 Hz
1 from C 65.4 Hz to B 123.5 Hz
2 from C 130.8 Hz to B 246.9 Hz
3 from C 261.6 Hz to B 493.8 Hz
4 from C 523.2 Hz to B 987.7 Hz
5 from C 1046.0 Hz to B 1975.0 Hz
Please note that there are 6 selectable octaves; this will allow you to choose the most suitable
octaves for each keyboard zone.
ATTENTION
The tables (waveforms) have been created respecting the natural range of the sampled timbre and
therefore the 6 octaves are only available for those timbres that actually have them; for example the
Acoustic Bass timbre only has octaves 0 and 1 while the Acoustic Piano timbre has all 6.
Parameter : FROM 1st WAVE
Power meter : B
Display Par. FROM 1st WAVE ( z )
OLD xx NEW yy