KEYTEK CTS 2000 Instruction Manual page 62

sound of Oscillator 2 , is activated.
Depending on the value of DCA2 TRHS ON we will have, for example:
1. DCA 2 is always active.
16. DCA 2 is triggered if you exceed, during execution, half a level of
dynamics.
32. DCA 2 is never activated.
ATTENTION
The use of the two TRHS parameters allows the instrument to be set up so that it automatically
switches from one timbre (created with the sound generation of Oscillator 1) to a completely
different one (created with the sound generation of Oscillator 2) simply by pressing the keys on the
keyboard harder or softer.