KEYTEK CTS 2000 Instruction Manual page 27

waveform without ever moving on to the next one.
Parameter : TIME 1
Power meter : D
Display Par. TIME 1 ( z )
OLD xx NEW yy
Value xx/yy : from 1 to 16
Function : Selects the time it takes for the Oscillator to switch from reading the SECOND to reading
the first.
waveform (table) to the THIRD waveform by mixing them together. If the value of
Time 1
Set to 1 the transition from the Second to the Third waveform is immediate.
With values greater than 1, the changeover is gradual and proportional to the value
entered.
Parameter : BREAK POINT
Power meter : E
Display Par. BREAK POINT ( z )
OLD xx NEW yy
Value xx/yy : from 1 to 16
Function : Selects the point (Break Point) at which mixing is to be stopped (set by the
Parameter Time 1 ) between the Second and Third waveforms. From the Break Point
Thereafter, mixing will continue with the time set by the Time 2 parameter.
If the Break Point value is set to 1, the Time 2 parameter will have no effect.
If the Break Point value is set to 16, the Time 1 parameter will have no effect.
Parameter : TIME 2
Power meter : F
Display Par. TIME 2 ( z )
OLD xx NEW yy
Value xx/yy : from 1 to 16
Function : Selects the time it takes for the Oscillator, after the Break Point, to pass through the Break
Point.
from reading the SECOND waveform (table) to the THIRD waveform by mixing them
together.