Edit Mode - KEYTEK CTS 2000 Instruction Manual

EDIT MODE

As we have already said, this mode allows you to MODIFY TEMPORARILY all the parameters indicated
in the graphic matrix on the right of the control panel above the preset selectors.
For the complete list and explanations of the functions of each parameter, see the PARAMETERS LIST
section on page 22.
In EDIT mode the changes made will be lost when changing or recalling a preset, to make the changes
permanent it is necessary to use the RECORD function (see paragraph RECORD MODE).
To enter EDIT mode, after selecting the preset to be edited, press the PRESETS/PARAMETERS button.
This button allows you to simply switch between Standard (Presets) and Edit (Parameters) modes,
and vice versa.
IMPORTANT
In Edit mode, the buttons 1 to 24 previously used to select presets will become selectors of their
associated PARAMETRIC FAMILIES.
As soon as you select the Edit (Parameters) mode by pressing the Preset/Parameters button, the
display will show:
This message indicates that the instrument is ready to modify the parameters relative to a Zone
(octave) of the keyboard.
Then press the ZONE/GLOBAL button to display :
This message indicates that the instrument is ready to modify the parameters of all 5 keyboard Zones
(Octaves) simultaneously.
Pressing the ZONE/GLOBAL button again will return the display to show:
To exit the Edit (Parameters) mode at any time, either GLOBAL or ZONE, simply press the
PRESETS/PARAMETERS button again.
A different way to return to Standard mode is to press the INTERNAL or CARTRIDGE button in the
Presets section.
The display will return to the type, number, bank and name of the preset, indicating that you have
returned to Standard (Preset) mode.
SELECT ZONE
PARAMETERS
SELECT GLOBAL
PARAMETERS
SELECT ZONE
PARAMETERS