KEYTEK CTS 2000 Instruction Manual page 52

_________________________________________________________
Family no. 13 : LFO 1 to OSC.1 Display Fam. : LOW FREQUENCY
Group : LOW FREQUENCY OSCILLATORS OSCILLATOR 1
________________________________________________________
Parameter : WAVE
Power meter : A
Display Par. LFO WAVE ( z )
OLD xx NEW yy
Value xx/yy : tri (triangular wave)
saw (saw tooth wave)
squ (square wave)
rnd (random
Function : Selects the type of waveform with which to carry out frequency modulation
of Oscillator 1.
Parameter : SPEED
Power meter : B
Display Par. LFO1 SPEED ( z )
OLD xx NEW yy
Value xx/yy : from 1 to 16
Function : Adjusts the frequency modulation speed of Oscillator 1.
Parameter : INITIAL LEVEL
Power meter : C
Display Par. INITIAL LEVEL ( z )
OLD xx NEW yy
Value xx/yy : from 0 to 15
Function : Adjusts the initial modulation level, i.e. the level at which the modulation starts, not the
level at which the modulation starts.
as soon as a key is pressed.
Parameter : FINAL LEVEL
Power meter : D
wave)