KEYTEK CTS 2000 Instruction Manual page 55

Display Par. FINAL LEVEL ( z )
OLD xx NEW yy
Value xx/yy : from 0 to 15
Function : Adjusts the final modulation level, i.e. the level to which the
modulation, starting from the initial level, after a delay time set by the
Delay parameter.
Parameter : DELAY
Power meter : E
Display Par. DELAY ( z )
OLD xx NEW yy
Value xx/yy : 0 to 15 + inf.
Function : Adjusts the delay time from the initial modulation level to the initial modulation level.
final.
If the Delay value is 1, you will go directly to the final modulation level.
If the Delay value is lower, the modulation will always remain at the initial level. The
modulation will always remain at the initial level.