KEYTEK CTS 2000 Instruction Manual page 71

_________________________________________________________
Family no. 22 : ZONE COPY Display Fam. : ZONE COPY
Group : ZONE COPY
________________________________________________________
This Parametric Family allows ALL PARAMETERS of a Keyboard Zone to be copied from a
Preset in any other Zone of any Preset, within the same Bank (A or B).
ATTENTION
Unlike all other Parametric Families, copying the contents of one Zone to another behaves like a
WRITE operation and therefore permanently modifies the Presets that have been copied.
Therefore, take special care when choosing the destination preset for the copy.
To perform the Zone Copy operation, it is necessary to :
-Select, in Standard mode, the starting preset (e.g. Internal Preset 20A) from which you wish to copy
a Zone.
-Turn to Edit mode and select Parametric Family No. 22.
As soon as a potentiometer (A to E) is moved slightly after selecting the Parametric Family ZONE
COPY , the display will show the message:
COPY: INT 20A ZN z
TO xxx nnA ZN y
-At this point, the individual potentiometers A, B, C and D will allow you to define:
Potentiometer A : Defines the Zone (z) of the Preset to be copied.
Potentiometer B : Defines the memory area (xxx) INTERNAL or CARTRIDGE on which the copy is to be
made.