KEYTEK CTS 2000 Instruction Manual page 39

_________________________________________________________
Family No. 8 : DCA 1 Display Fam. DCA 1 ENVELOPE
Group : DCA & DCF ENVELOPE GENERATORS
________________________________________________________
Parameter : ATTACK
Power meter : A
Display Par. ATTACK TIME 1 ( z )
OLD xx NEW yy
Value xx/yy : from 1 to 32
Function : Determines the time that the amplifier of each Oscillator 1 item takes to
Reach a maximum level from a level of 0 (from the moment of pressing the
key).
Parameter : DECAY
Power meter : B
Display Par. DECAY TIME 1 ( z )
OLD xx NEW yy
Value xx/yy : 0 to 31 + inf.
Function : Determines the time that the amplifier of each Oscillator 1 item takes to
return from a maximum level, obtained at the end of the Attack
level
lower, determined by the Break Point parameter. If the Break Point value
will be at 1 (minimum value) the Decay will set the amplifier level to 0, vice versa
if the Break Point value is 64 (maximum value) the Decay function will be
non-existent. If the Decay value is set to inf. (infinity) the level of the
amplifier will remain at maximum until the button is released and the
Break Point, Slope and Sustain functions.
Parameter : BREAK POINT
Power meter : C
Display Par. BREAK POINT 1 ( z )
OLD xx NEW yy
Value xx/yy : from 1 to 64
phase, to a