KEYTEK CTS 2000 Instruction Manual page 68

_________________________________________________________
Family no. 21 : WRITE & COPY Display Fam. : WRITE & COPY
Group : WRITE & C.
________________________________________________________
Parameter : ENABLE / DISABLE
Power meter : A
Display Par. WRITE or WRITE
DISABLE ENABLE
Value xx/yyy : write disable - write enable
Function : Enables (Write Enbable) and disables (Write Disable) the WRITE in memory of new
preset and therefore also the Global Back-up, Copy, and Zone Copy functions.
Parameter : C.W. OSC1 < > 2
Power meter : B
Display Par. COPY: OSC1 CW ( z ) or COPY: OSC2 CW ( z )
TO OSC2 CW TO OSC1 CW
Value xx/yy : 1 to 2 or 2 to 1
Function : Allows you to select the function of complete copying of the parameters of the Families
Parametric Cross Wave 1 and 2 from one Oscillator to another by defining the
direction (from
where to where) of the copy.
Once the direction of copying has been defined (for the current Zone (z)) the
operation must
be completed by pressing the ENTER button.
After pressing the Enter key, the display will show the following message for a few
seconds:
and then display again:
OSC CW COPY
COMPLETED
WRITE/COPY