KEYTEK CTS 2000 Instruction Manual page 66

Value xx/yy : from 0 to 127
Function : Selects the number of programme changes to be sent via Midi, on the channel of
Transmit selected by the parameter Transmit Ch. whenever the
preset.
ATTENTION
Program Change will only be received and executed if the following conditions are
met
on the Midi channel assigned to Zone 0.
Parameter : TX TRANSPOSE
Power meter : E
Display Par. : TX - RX TRANS. ( z )
OLD xx NEW yy
Value xx/yy : -48 to +48
Function : Modifies the code number of the Midi note, whether received or transmitted,
adding or subtracting up to 48 semitones.