KEYTEK CTS 2000 Instruction Manual page 31

_________________________________________________________
Family no. 4 : CROSS WAVE 2 Display Fam. : OSCILLATOR 2
Group : DIGITAL OSCILLATOR 2 CROSS WAVE 2
________________________________________________________
Parameter : TO 2nd WAVE
Power meter : A
Display Par. TO 2nd WAVE ( z )
OLD xx NEW yy
Value xx/yy : from 0 to 61
Function : Selects the SECOND waveform (table) to be read and on which the CROSS ends.
(mixing). between the FIRST and SECOND waveforms. For the list of Forms
Waveforms (Tables) available see annex WAVE SHAPES-TABLES
Parameter : TO 3rd WAVE
Power meter : B
Display Par. TO 3rd WAVE ( z )
OLD xx NEW yy
Value xx/yy : from 0 to 61
Function : Selects the THIRD waveform (table) to be read and on which the CROSS ends
(mixing) between the SECOND and THIRD waveforms. For the list of Forms
Waveforms (Tables) available see annex WAVE SHAPES-TABLES
Parameter : DELAY
Power meter : C
Display Par. DELAY TIME ( z )
OLD xx NEW yy
Value xx/yy : 1 to 15 + inf.
Function : Selects for how long the SECOND waveform (table) is to be read, and
then determines the delay time at which Cross (mixing) starts
between the SECOND and THIRD waveforms.
If the Delay value is set to 1, the second waveform (table) will be read out.
one time before moving on to the mixing phase, if inverted it is placed to
inf. mixing does not take place and therefore the Oscillator always reads Second