KEYTEK CTS 2000 Instruction Manual page 41

OLD xx NEW yy
Value xx/yy : 1 to 31 + inf.
Function : Determines the time that the amplifier of each Oscillator 1 item takes to
return, from the level determined by the Sustain parameter, to 0 after release of the
key, the Release time also applies if the key is released before you have
Complete the Attack, Decay and Slope phases.
If the Sustain level is set to 1 (minimum value) and the Attack , Decay and Slope
phases
have been completed, the Release function will be non-existent.
If the Release value is set to inf. (infinity) the amplifier level will remain
that to which the amplifier has arrived when the button is released.
ATTENTION : With this parameter you can also set a second time of
release, other than the keyboard release, which will be activated by pressing the
RELEASE PEDAL.
The Pedal Release value is selected by holding down the Pedal during
the value setting phase.
As soon as the pedal is pressed, the display will show :
RELEASE TIME 1p (z)
OLD xx NEW yy
The lower case p next to the word Time 1 indicates that you are selecting the value of
Pedal Release (NEW) while the OLD value will be the one previously
assigned to the pedal itself.
Normally, a value greater than that determined for the pedal is selected.
for the keyboard.