KEYTEK CTS 2000 Instruction Manual page 30

Display Par. BREAK POINT ( z )
OLD xx NEW yy
Value xx/yy : from 1 to 16
Function : Selects the point (Break Point) at which mixing is to be stopped (set by the
Parameter Time 1 ) between the First and Second waveforms. From the Break Point
Thereafter, mixing will continue with the time set by the Time 2 parameter.
If the Break Point value is set to 1, the Time 2 parameter will have no effect.
If the Break Point value is set to 16, the Time 1 parameter will have no effect.
Parameter : TIME 2
Power meter : F
Display Par. TIME 2 ( z )
OLD xx NEW yy
Value xx/yy : from 1 to 16
Function : Selects the time it takes for the Oscillator, after the Break Point, to pass through the Break
Point.
from reading the FIRST waveform (table) to the SECOND waveform by mixing them
together.
If the value of Time 1 is set to 1 the transition from the First to the Second form
wave is immediate.
With values greater than 1 the changeover is gradual and proportional to the value
entered.