KEYTEK CTS 2000 Instruction Manual page 29

Value xx/yy : from 0 to 61
Function : Selects the FIRST waveform (table) to be read and from which the CROSS begins.
(mixing). For a list of available Waveforms (Tables) see annex
WAVEFORMS_TABLES
Parameter : DELAY
Power meter : C
Display Par. DELAY TIME ( z )
OLD xx NEW yy
Value xx/yy : 1 to 15 + inf.
Function : Selects for how long the FIRST waveform (table) is to be read, and
then determines the delay time at which the Cross (mixing) starts
between the FIRST and SECOND waveforms.
If the Delay value is set to 1, the first waveform (table) will be alone.
time before moving on to the mixing phase, if inverse is placed at inf. the
mixing does not take place and therefore the Oscillator always reads the First
waveform
without ever moving on to the next.
Parameter : TIME 1
Power meter : D
Display Par. TIME 1 ( z )
OLD xx NEW yy
Value xx/yy : from 1 to 16
Function : Selects the time it takes for the Oscillator to switch from reading the FIRST to reading the
LAST.
Waveform (table) to the SECOND waveform by mixing them together. If the value of
Time 1
is set to 1 the transition from the First to the Second waveform is immediate.
With values greater than 1 the changeover is gradual and proportional to the value
entered.
Parameter : BREAK POINT
Power meter : E